• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Watches to wear with your flight jackets...

Spitfireace

Well-Known Member
Got a 43AF Elgin coming from eBay. Did it and I don't know why. I'm not a wealthy type of person. Just love it I guess. I work hard for my money and this is my reward.
 
Last edited:

Spitfireace

Well-Known Member
1680432976551.png
 

Kermit3D

Well-Known Member
I don't think anyone buys a good mechanical watch purely for its accuracy. You don't want a watch to gain, or worse still, lose too much though because the main beauty of them apart from finish and looks is the fine engineering and accuracy of their movements - even though a cheap quartz keeps time better.

But of course if you wear it a lot and it's well regulated to your lifestyle a good mechanical watch can be more accurate that a quartz watch over longish period of time even though its rate is nowhere near as good. It will gain and lose and hopefully balance out while the quartz will probably just keep slowly gaining.

One of my favorite watches in my humble collection is this old pilot's watch (at least it was designed for pilots).
It is not very precise... it drifts about 30 sec to 1 minute per day. But no matter, I love it so much !
In fact it's not so bad for a watch that is almost 90 years old.

Roamer_05.jpg
 

Spitfireace

Well-Known Member
I have a Rolex and I have a current Omega and the Omega is the more accurate watch. In fact it's probably the most accurate mechanical watch I have ever owned and hardly gains or loses at all when worn for at least twelve hours a day. But I prefer my nearly twenty years old Air King. It may gain three seconds or so in twenty four hours now but it's a lovely little thing and the Omega is a bit of a lump in comparison.

The other thing I like about the Rolexes I've owned is the lack of rotor noise. Every other automatic watch I have ever had including the Omegas I've owned you can hear the rotor flap around as you move your wrist if you listen out for it. But the construction of the Rolex rotor movement is different to other watches and is completely silent.
I think the best bang for the buck so to speak, is a good 1950's Omega Seamaster. Overlooked by the Rolex enthusiasts, but for those in the know a superior option.
 

Spitfireace

Well-Known Member
The only reason I don't have one is because I came to the conclusion that a King Seiko 1974 was a better option. Half the price even better movement. 25 jewels.
 

Spitfireace

Well-Known Member
Sorry out of sequence pic. Just thought I should show the case back of the A-11 that is on the way in the mail somewhere between Boca Raton and here.
 

Spitfireace

Well-Known Member
The thing about buying watches on the internet is they can be frankensteined. Which means they could be made up of parts. Getting an untouched watch is the goal. This one I think is untouched and running well. So I'm really looking forward to it's arrival in the mail.
 

Pilot

Well-Known Member
The thing about buying watches on the internet is they can be frankensteined. Which means they could be made up of parts. Getting an untouched watch is the goal. This one I think is untouched and running well. So I'm really looking forward to it's arrival in the mail.
With all due respect… the watch has been “ retouched” hence not untouched…( sorry ).
The spring bars,the crown , the cristal, the dial, wonder about the movement…
However, surely… not … untouched.
Attached an untouched one…please feel free to compare…Sorry…
8A1F7319-FD5C-4CB6-B343-2FB101F7020C.jpeg
EF6A966B-B335-46C9-8E06-F3418881B03D.jpeg
 

B-Man2

Well-Known Member
I’m just guessing but I would imagine that untouched ones are exceptionally rare these days. How can you find one that’s in its original condition and not messed with?
Also I would imagine that the cost of an original A-11 with all original parts might be in the thousands of dollars . Just asking as I know nothing about these watches .
 

Pilot

Well-Known Member
I’m just guessing but I would imagine that untouched ones are exceptionally rare these days. How can you find one that’s in its original condition and not messed with?
Also I would imagine that the cost of an original A-11 with all original parts might be in the thousands of dollars . Just asking as I know nothing about these watches .
Sorry about that… but….Plenty of “ bargain untouched “ A-11 watches ( and other “ untouched authentic originals etc”) on crapbay… ( billions of professional experts serarching for the golden nuggets …hahaha ) …Again and as for all and everything: “pay peanuts… get monkeys “ “…at best a Frankensteiner”. Sorry for the cruel truth.
 
Last edited:

Pilot

Well-Known Member
Please allow following as supporting pics…
please see, hands, dial, crown, cristal, case, back markings “graphics”, spring bars etc… of what untouched means… same maker/contract etc…
Happy to see the “ untouched “ movement.
BA4B2E69-2611-4082-9E8D-8C8F598DC87C.jpeg
8B9F61B1-ACE0-49C6-ADCC-2F55B4B879F7.jpeg
7C608052-658F-4C50-A6C2-4AABFEF050AB.jpeg
21A885C5-E2A0-40A2-8072-1873BA22DA5A.jpeg
 
Last edited:
Top